Aquastream logo

Hand Held Bidets - Accessories

www.aquastream.co.uk

020 8671 2355

info@aquastream.co.uk
Home | Hand Held Bidets | Mixer Valves and Fittings | Lever Shower Heads | Hydro Brush | News and Information | Contact | FAQs
|
Mixer valves, control valves, metal hose, supports and accessories

The hand held bidet has to be connected to a water supply.
We cannot really advise on individual installations and we always recommend that you speak to a plumber for advice on your particular scenario. Having said that we do our best to talk through the general options so please do not hesitate to call for a chat.

Below you will find a range of items that can facilitate and enhance the installation.


A simple installation can be quick and easily achieved with a very basic knowledge of D.I.Y.
We retail a self cut kit to meet this requirement.

Warm water mixer valves
Over recent years there has been an ever increasing demand for a warm water solution.
The hand held bidet itself cannot heat the water so this means mixing hot and cold water in a mixer valve prior to delivering warm water to the bidet; as in a normal shower. We retail various mixers dependent on your budget and installation. See below.

Water control valve / stop valve
A practice we strongly recommend is that a water control or stop valve is incorporated in the connection. This allows the water to be easily turned off when the hand held bidet is not in use and can also control the flow of water to the shower head. We supply a range of valves that serve this purpose.
Please call for further information.

wall support in chrome

Broadly speaking in relation to the water pipework there are two types of installation: exposed and concealed.
Exposed
When existing pipework in the bathroom is being adapted and the pipework can be seen (is exposed); the items that work with exposed pipework are more likely to be of assistance.

Concealed
When a bathroom is being newly constructed or refurbished and thus new plumbing is being installed the pipework is more likely to be concealed within/behind the wall. The items that work with concealed pipework are more likely to be of assistance in this case.
Alongside each of the items below we have indicated which type of installation they are suited too.

This is just a general rule and there will be scenarios where this will not apply.

Supports ___ Angle valves ___ Mixer valves ___ DIY kit ___ Water control valve ___ Metal hose

BR001
WALL SUPPORT in CHROME plated BRASS

incorporating automatic WATER CUT OFF - concealed pipework
£37.95

This item acts as a
stop valve
Image shows BR001 wall support with Oasis white (not included)

BR001

This item supports the lever shower and at the same time cuts the water flow off to the shower.
We offer 2 types of this wall support depending on your planned installation:

The BR001 can be used when the water supply pipework is concealed behind the wall.

For further details

BR002 wall supportBR002
WALL SUPPORT in CHROME plated BRASS

incorporating automatic WATER CUT OFF - exposed pipework
£59.95


This item acts as a
stop valve
Image shows BR002 wall support with Classic White and Chrome hand held bidet for illustrative purposes. This is not included.

BR002

The second of 2 types of this wall support depending on your planned installation:

The BR002 can be used when the pipework is exposed.

For further details

angle valve with fornara classic hand held bidetANGLE VALVE 1 in CHROME plated BRASS - concealed pipework
£19.45

This item acts as a
stop valve

Image shows angle valve with Classic White and Chrome hand held bidet in it's wall support for illustrative purposes. This is not included.

Angle Valve 1
This valve can be used when the water supply feeds through the wall ( concealed pipework).
The hose of the hand held bidet is connected to the outlet and the water can be turned on and off as required.
The valve incorporates a filter.

Further details

ANGLE VALVE 2 in CHROME plated BRASS - concealed pipework
£19.45

This item acts as a
stop valve

Image shows angle valve with white hose for illustrative purposes. This is not included

Angle Valve 2
This is a similar type of valve to the above except it has a lever rather than a tap. It
can be used when the water supply feeds through the wall ( concealed pipework).
The hose of the hand held bidet is connected to the outlet and the water can be turned on and off as required using the lever.

Further details

Angle Valve 3

ANGLE VALVE 3 in CHROME plated BRASS - concealed pipework
£15.75

This item acts as a
stop valve

Image shows angle valve with white hose for illustrative purposes. This is not included

Angle Valve 3
Again this is very similar to Angle Valve 1.
This valve can be used when the water supply feeds through the wall ( concealed pipework).
The hose of the hand held bidet is connected to the outlet and the water can be turned on and off as required.

Further details

warm water

Mixer valve wall mounted MANUAL MIXER VALVE wall mounted - concealed pipework
£75.95


MIX 3
This item acts as a stop valve

The MIX3 and MIX4 have been specifically designed with the lever shower in mind. The mixer controls not only the temperature but also the flow of the water and so acts as the stop valve.
It accepts the hot and cold water feeds from behind the wall and results in a very stylish and practical solution.
Width: 135mm

Further details


warm water

mixer valve wall mounted with support and antea hand held bidet MANUAL MIXER VALVE WITH SUPPORT wall mounted - concealed pipework
£79.95

MIX 4

This item acts as a stop valve
We apologise - this item is currently out of stock

The MIX4 is the same as the MIX3 above with the addition the actual support for the lever shower is incorporated into the design so there is no need for a separate wall support.
Please note it is also wider in width than the MIX3 - 165mm

Further details

*The image shows the mixer valve incorporating support. The hand held bidet (Antea Chrome) is for illustrative purposes. This is not included. Please purchase this separately.

 


warm water

manual mixer valveMANUAL MIXER VALVE - exposed pipework
£37.45


MIX 1

 

A small, neat valve that will mix the hot and cold water feeds to supply warm water to the lever shower.
This valve can be used where the pipework is exposed, not hidden within a wall. It can therefore be used when adapting existing plumbing.
We supply the valve with an elbow tap that controls the water flow.

Further details

 

Washing machine problems? The manual mixer valve is also useful in other applications such as with the modern single (cold) feed washing machines. This valve allows you to easily connect up a hot supply to the machine as well, so that every so often the machine can be flushed all the way through with piping hot water. Problems such as mould in washing machines can be caused by permanently cold and low temperature water supplying the machine. Just putting the machine on a hot (service) wash does not mean that hot water reaches all of the parts of machine, such as the water inlet, and so it fails to fully tackle the problem of mould and bacteria developing in these areas.

self cut kit for hand held bidet installationSELF CUT KIT - exposed pipework
£18.55


This item acts as a
stop valve

 

We can supply a kit that contains a self cutting valve that in some instances can be used in a D.I.Y capacity to plumb into the appropriate water pipe without even having to turn the water supply off

Further details

shower hose 1.2 metre METAL SHOWER HOSE
Metal 1.2 metre in length

£13.55
Many of our sets contain a plastic hose. This metal hose can replace the plastic hose but is an additional item that needs to be purchased.

The Classic, Luxus and Stella sets are supplied with a metal hose as standard.

Further details

shower check valve SHOWER CHECK VALVE
£4.95

This valve is a non return valve. It reduces the risk of water going back the wrong way (back siphonage). It can be screwed in between the hose and the water supply.

Back to the top of the page

paypal cardsPostage and packing in the UK is charged at £3.95 per order, not per item. We use the Royal Mail First Class service. All prices shown include VAT.
The postage amount will be added to your invoice total at the end of the order process.
For delivery timescales and more details please
see here
We gladly take orders from outside the UK however in order to calculate the postage please email us with your choice and we can give you a price. Please
also visit www.aquastream.eu

Purchases from our website are conducted online by PayPal.
With PayPal you can purchase our products using your credit or debit card as well as a PayPal account if you have one.

If you wish to pay by bank transfer please email us with your choice and we will respond with an order confirmation and our bank details. info@aquastream.co.uk
To pay by cheque please post to the address below with your requirements, address and contact details.
If you experience any difficulties at all using our website or the PayPal payment system please contact us
.

Customer Rights: We trust that you are very happy with your purchase, however, if upon receipt of your order you decide it is not what you want please return it to us at the address below within 14 days and we will make a full refund (postage and packing cost excluded) Please notify us beforehand.

Products are guaranteed against defects in manufacturing for one year. If such defects occur during the warranty period, excluding defects arising from abuse or carelessness, the product will be replaced or repaired free of charge.

Important Note:
The Water Supply (Water Fittings) Regulations of 1999 must be followed to prevent the chance of backflow and any risk to public health. Further details here and/or visit the Water Regulations Advisory Scheme website www.wras.co.uk


Home | Hand Held Bidets | Mixer Valves and Fittings | Lever Shower Heads | Hydro Brush | News and Information | Contact | FAQs
aquastream logo 3
Aquastream, London
© AquaStream 2014